内容一：对网络数据进行加密传输
1.1 生成 SSL
1.1.1 创建 CA 证书
# openssl genrsa 2048 > ca-key.pem
Generating RSA private key, 2048 bit long modulus
..+++
...................................+++
e is 65537 (0x10001)
# openssl req -new -x509 -nodes -days 3600 -key ca-key.pem -out ca.pem
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [XX]:
State or Province Name (full name) []:
Locality Name (eg, city) [Default City]:
Organization Name (eg, company) [Default Company Ltd]:
Organizational Unit Name (eg, section) []:
Common Name (eg, your name or your server's hostname) []:ca
Email Address []:（注意：创建 CA 证书、服务端证书、客户端证书时 Common Name 必须要有值，且必须相互不一样）
1.1.2 创建服务端证书，并去除加密，并使用刚刚的 CA 证书进行签名
# openssl req -newkey rsa:2048 -days 3600 -nodes -keyout server-key.pem -out server-req.pem
Generating a 2048 bit RSA private key
.............+++
...+++
writing new private key to 'server-key.pem'
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [XX]:
State or Province Name (full name) []:
Locality Name (eg, city) [Default City]:
Organization Name (eg, company) [Default Company Ltd]:
Organizational Unit Name (eg, section) []:
Common Name (eg, your name or your server's hostname) []:
Email Address []:
Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:
An optional company name []:
# openssl rsa -in server-key.pem -out server-key.pem
writing RSA key
# openssl x509 -req -in server-req.pem -days 3600 -CA ca.pem -CAkey ca-key.pem -set_serial 01 -out server-cert.pem
Signature ok
subject=/C=XX/L=Default City/O=Default Company Ltd
Getting CA Private Key（注意：创建 CA 证书、服务端证书、客户端证书时 Common Name 必须要有值，且必须相互不一样）
1.1.3 创建客户端证书，并去除加密，并使用刚刚的 CA 证书进行签名
# openssl req -newkey rsa:2048 -days 3600 -nodes -keyout client-key.pem -out client-req.pem
Generating a 2048 bit RSA private key
..................+++
..............................................+++
writing new private key to 'client-key.pem'
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [XX]:
State or Province Name (full name) []:
Locality Name (eg, city) [Default City]:
Organization Name (eg, company) [Default Company Ltd]:
Organizational Unit Name (eg, section) []:
Common Name (eg, your name or your server's hostname) []:
Email Address []:
Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:
An optional company name []:
# openssl rsa -in client-key.pem -out client-key.pem
writing RSA key
# openssl x509 -req -in client-req.pem -days 3600 -CA ca.pem -CAkey ca-key.pem -set_serial 01 -out client-cert.pem
Signature ok
subject=/C=XX/L=Default City/O=Default Company Ltd
Getting CA Private Key1.1.4 对生成的证书进行验证
# openssl verify -CAfile ca.pem server-cert.pem client-cert.pem
server-cert.pem: OK
client-cert.pem: OK1.2 将 SSL 添加到 MariaDB & MySQL
1.2.1 将 SSL 放在指定的位置
# mv ca.pem /home/mysql/sslconfig/ca.pem
# mv server-cert.pem /home/mysql/sslconfig/server-cert.pem
# mv server-key.pem /home/mysql/sslconfig/server-key.pem1.2.2 修改配置文件
# vim /etc/my.cnf在：
......
[mysqld]下面添加：
ssl-ca=/home/mysql/sslconfig/ca.pem
ssl-cert=/home/mysql/sslconfig/server-cert.pem
ssl-key=/home/mysql/sslconfig/server-key.pem
......（补充：这里以 MariaDB 数据库的配置文件是 /etc/my.cnf 为例）
1.2.3 重启数据库
# systemctl restart mariadb（补充：这里以重启 MariaDB 数据库为例）
1.3 验证 SSL
1.3.1 查看 have_ssl 和 ssl 变量
> show variables like 'have_%ssl';
> show variables like '%ssl%';（补充：如果它们的参数为 yes ,表示服务端已经开启 SSL）
1.3.2 查看 SSL 的状态
> show status like 'ssl_cipher'（补充：如果出现 “SSL:Cipher in use is DHE-RSA-AES256-SHA“ 则表示客户端已经使用 SSL 连接了）
1.3.3 确保所有数据库用户使用 SSL
> grant usage on <database>.<table> to '<user>'@'<host>' reouter ssl;1.3.4 用户通过 SSL 连接数据库的方法
> mysql -u <user> -p -h <host> --ssl-ca=/home/mysql/sslconfig/ca.pem内容二：开启审计
（如果是 MariaDB 和 MySQL 5.7）
> set global log_warning=2;（如果是 MySQL 8.0 及以上版本开启审计）
> set global general_log = on;
> set global log_timestamps = SYSTEM;