Category: System Hardware (系统硬件)

Posted on

[命令] Linux 命令 hwclock （硬件时钟的管理）

内容一：hwclock 命令的格式

# hwclock <function> <option...>

内容二：hwclock 命令的功能

1) –adjust，以前每次更改硬件时钟的记录，都会被写入到 /etc/adjtime 文件中。使用 –adjust 功能可以根据过往来记录估算和校正硬件时钟
2) –debug，显示执行 hwclock 命令时的详细过程
3) –directisa，hwclock 默认从 /dev/rtc 存取硬件时钟，–directisa 功能可以直接从 I/O 存取硬件时钟
4) –hctosys，将硬件时钟调整到和系统时钟一致
5) –help，显示帮助信息
6) –set –date=，设置硬件时钟的时间
7) –show，显示硬件时钟的时间
8) –systohc，当硬件时钟和系统时钟一致时，将硬件时钟的时区调整到和系统时钟一致
9) –test，测试命令
10) –localtime，将硬件时钟视为本地时间
11) –version，显示命令的版本

Posted on

[内容] Linux 虚拟机和物理机的区分

如果是虚拟机：

# dmidecode -s system-product-name
VMware7,1

（补充：从输出结果可以看出此为 VMware7,1 虚拟机）

或者：

# systemd-detect-virt
vmware

（补充：从输出结果可以看出此为 vmware 虚拟机）

如果是物理机：

# dmidecode -s system-product-name
PowerEdge R940

（补充：从输出结果可以看出此为 PowerEdge R940 物理机）

或者：

# systemd-detect-virt 
none

（补充：从输出结果可以看出此为物理机）

Posted on

[内容] Linux 网卡 IP 地址的显示

方法一：ip 命令

# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:1c:42:c9:3c:81 brd ff:ff:ff:ff:ff:ff
    inet 10.10.10.129/24 brd 10.10.10.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fdb2:2c26:f4e4:0:55da:1265:541f:8007/64 scope global temporary dynamic 
       valid_lft 563315sec preferred_lft 44695sec
    inet6 fdb2:2c26:f4e4:0:21c:42ff:fec9:3c81/64 scope global dynamic mngtmpaddr 
       valid_lft 2591846sec preferred_lft 604646sec
    inet6 fe80::21c:42ff:fec9:3c81/64 scope link 
       valid_lft forever preferred_lft forever

或者：

# ip a s
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:1c:42:c9:3c:81 brd ff:ff:ff:ff:ff:ff
    inet 10.10.10.129/24 brd 10.10.10.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fdb2:2c26:f4e4:0:55da:1265:541f:8007/64 scope global temporary dynamic 
       valid_lft 563315sec preferred_lft 44695sec
    inet6 fdb2:2c26:f4e4:0:21c:42ff:fec9:3c81/64 scope global dynamic mngtmpaddr 
       valid_lft 2591846sec preferred_lft 604646sec
    inet6 fe80::21c:42ff:fec9:3c81/64 scope link 
       valid_lft forever preferred_lft forever

或者：

# ip address show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:1c:42:c9:3c:81 brd ff:ff:ff:ff:ff:ff
    inet 10.10.10.129/24 brd 10.10.10.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fdb2:2c26:f4e4:0:55da:1265:541f:8007/64 scope global temporary dynamic 
       valid_lft 563315sec preferred_lft 44695sec
    inet6 fdb2:2c26:f4e4:0:21c:42ff:fec9:3c81/64 scope global dynamic mngtmpaddr 
       valid_lft 2591846sec preferred_lft 604646sec
    inet6 fe80::21c:42ff:fec9:3c81/64 scope link 
       valid_lft forever preferred_lft forever

方法二：ifconfig 命令

# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.10.10.129  netmask 255.255.255.0  broadcast 10.10.10.255
        inet6 fdb2:2c26:f4e4:0:21c:42ff:fec9:3c81  prefixlen 64  scopeid 0x0<global>
        inet6 fe80::21c:42ff:fec9:3c81  prefixlen 64  scopeid 0x20<link>
        inet6 fdb2:2c26:f4e4:0:55da:1265:541f:8007  prefixlen 64  scopeid 0x0<global>
        ether 00:1c:42:c9:3c:81  txqueuelen 1000  (Ethernet)
        RX packets 698666  bytes 485434755 (462.9 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 372557  bytes 699406543 (667.0 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 73792  bytes 394285172 (376.0 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 73792  bytes 394285172 (376.0 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

方法三：iwconfig 命令

# iwconfig 
lo        no wireless extensions.

eth0      no wireless extensions.